Add the jumbo 4" diameter sphere mold to your collection. Use both halves of the mold together or one half separately. This sphere is large enough to use with "inclusions". (An inclusion is another silicone shape that is temporarily placed on the inside of the sphere mold.) Put an inclusion in this mold, cast, and then remove it to expose a decorative, negative impression in the sphere casting.
This mold makes one, 4" diameter sphere. Perfect for amenities and showpieces. When banded together, this specially designed two-part sphere mold registers so tightly together that only the smallest seam line is visible. The two-part mold design allows the user to have open access the interior of the mold for encapsulation or casting perfect half spheres. The mold has 1 sub-compartment allowing the user to cast half spheres with a square plate attached to it. A half sphere with plate is great for posting beneath a showpiece base or to provide a little extra sugar mass (corners) for pulling a shape off of the half sphere. The possibilities are endless!
Helpful Hint: This mold holds a large volume of sugar and will hold the heat due to the insulating properties of the silicone. Be sure to pour the sugar as cool as possible in order to prevent the sugar from continuing to boil inside the mold.
Safety Hint: It is critical the user band the mold together tightly to prevent it from accidentally separating during use. (Wide rubber bands included.) Made of food contact silicone. Wash before use. Do not heat above 300° F/ 148° C.
Size: 4" (10 cm) diameter.
Helpful Hint: This mold holds a large volume of sugar and will hold the heat due to the insulating properties of the silicone. Be sure to pour the sugar as cool as possible in order to prevent the sugar from continuing to boil inside the mold.
Safety Hint: It is critical the user band the mold together tightly to prevent it from accidentally separating during use. (Wide rubber bands included.) Made of food contact silicone. Wash before use. Do not heat above 300° F/ 148° C.
Size: 4" (10 cm) diameter.
